YIHUA 968DA++ 3 in 1 soldering Rework Station
Input voltage:110V/220V/230V/240V Product weight:4.8KG/PCS
Product Details


YIHUA 968DA++ 3 in 1 soldering Rework Station



1,Temperature controls utilize core technology, adopting microprocessor-PID programming for high-speed 100ms real-time tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable.

2. With PID high-speed 100ms rapid temperature calibration, conversions are energy-efficient, providing constant temperature power consumption at levels much lower than comparable machines, equating to greater energy savings!

3. The air gun handle wire similarly employs a high-temperature silicone wire, a silent brushless-motor fan, stainless steel tubing, and a cutting-edge ceramic-framed heating core for extremely stable and reliable performance!

4. The 968DA++ handle features user-friendly automatic/manual functionality! When the air gun is frequently used, switching to manual mode disables automatic cool down when the handle is docked in the holder!

5. Soldering iron handle wire employs a high-temperature silicone wire (undamaged when 300o soldering tip contacts silicone wire for 30 seconds); the heating element employs an imported high-power heating element for fast temperature compensation, particularly suitable for desoldering crude terminals, large joints, and difficult to reach spots, not to mention general solder joint desoldering.

6.The soldering iron is designed with an anti-smoke function. Fumes generated from the soldering iron are immediately sucked away via dust sheet absorption and filtration. This function helps purify the air to provide a healthier, eco-friendly working environment. Never again will users have to worry about soldering iron fumes!

7. If necessary, the product can be packaged with a vacuum-suction pen, enabling use for IC though simple removal of the soldering iron intake pipe from the suction port and attachment of the vacuum suction pen.

8. The soldering iron stand is made of iron alloy with a sponge-fixed base and a fixed axis for the soldering iron wiring for greater convenience.

9. Machine components are equipped with self-detection functionality for complete, intelligent overheating, short-circuit, open-circuit, overload, and fault indication and protection

10.The back of the machine features a main power supply switch. For added energy savings and greater safety, turn off the main power supply switch when the machine will not be used for a long period of time.


Information regarding PID programming:

The core algorithm sets a frequency for measurements, comparisons, and execution to be divided into rapid 20ms, high-speed 100ms, and fast 200ms hot air gun and soldering iron temperature controls! PID is one of the most important parameters for temperature accuracy and stability! Rapid 20ms is the fastest algorithm for AC220V 50Hz applications. Cycling at 20ms for each 50Hz half-wave the program already has precise control of every power supply cycle--an industry first! A variety of high-end YIHUA hot air gun models employ rapid 20ms cycles, and the soldering iron temperature calibration is set to the two standards of high-speed 100ms and fast 200ms cycles as the temperature sensing location is within the ceramic heating core. Taking time for temperature conveyance to the soldering iron tip and back, high-speed 100ms cycles provide optimal control speeds! (the vast majority of existing programmable cycles in industry can only reach 200ms--500ms) 




Rated voltage

AC 220V±10%  50Hz



300 Constant Temperature Power (High-Speed PID Programmed to Energy Savings)


Working environment

040 relative humidity80

Storage environment

2080  relative humidity80





Parts parameters

Hot air rework

Soldering iron

Operating Voltage

AC 220V±10%  50Hz

AC 26V±10%  50Hz

Output power



Temperature range



Air Supply Mode 

 Diaphragm pump spiral wind


Air Flow



   Temperature Stability

±1℃ (Static

±1℃ (Static

Display Mode

LED display

LED display

Calibration Mode

The PID digital program


The PID digital program


PID Temperature Calibration Cycle

rapidly 20ms

high-speed 100ms

Heating core

Ceramic columned heating element.

Imported heater

Tip ground impedance


Tip of ground voltage





968DA++ 730x487.jpg


Home | Company Profile | Products | Shopping Cart | Support | Contact Us Copyright ? 2011 Yihua Store All rights reserved.