YIHUA 853AAA 3in1 function preheating desoldering station
Input voltage:110V/220V/230V/240V Product weight:5.54KG/PC
Size:37*38*18CM
Product Details

YIHUA 853AAA 3in1 function preheating desoldering station

 

 

Feature

1.Using microcomputer processor PID programmable temperature control technology.

2.Preheating station is to use a glaze layer having a high thermal effect, good thermal shock resistance of the ceramic as the substrate, high-quality nickel branded alloy wire once sintering.It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric strength, clean, easy to install and so on features.

3.Air Gun heater use ceramic heater.heating elements firmly wrapped around the model ceramic, rapid and uniform heating.

Use the upgraded version fan, the airflow larger than the ordinary fan, spiral out of the wind, long life.

4.Soldering iron part using Imported heater,heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damag to delicate   SMD components.

5.The machine has a self-test function.full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.

6.853AAA preheating station using the user-friendly design.the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation.Uses magnetic induction technology.Card board bracket to prevent protective pads suck hood above.

Can rotate 360 degrees, flexible card board.It is suitable for the circuit boards of different shapes and sizes.

7.853AAA temperature correction function

Adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation,can use this function calibration temperature.

The correction temperaturerange is -50 °C ~ +50 °C.

8.853AAA has Celsius / Fahrenheit temperature display function

Meet different market needs to design the temperature display mode, you can choose under customary interest.

10.Air gun manual / automatic function.

11.The air gun without wind protection function, when the air gun stop sending wind abnormally ,

during the using process, the heating element will stop heating to prevent burn the handle in the

windless condition. It is greatly improving the product safety.  

 

 

Data

Voltage AC220C±5%

Max power consumption 1270W  

Preheating station parts

Temperature Range 50~400  °c / 152~752 °F

Temperature Stability ±2  °c

Display Type LED

Area 120*120mm 

Hot Air Reworks parts

 

Airflow type brushless fan spiral out wind

Air Flow ≤120L/min

Temperature Range 100  °c -480  °c /212°F ~896 °F

Temperature Stability  ±1  °c

Display Type LED

Handle cable length ≥100cm 

 

Soldering Iron parts

Temperature Range 200 °c -480 °c /392°F~896 °F

Soldering iron heater :imported large power heater

Solder iron holder blue Ferro-alloy iron holder 

Soldering iron handle Blue iron handle

Temperature Stability ±1°c

Tip of ground voltage <2mV

Tip ground impedance <2 ohm

Display Type LED

Handle cable length ≥100cm

 

 

NOTE:Due to shippment cann't contain rosin,so the tip cleanner box don't have rosin inside.

 

 YIHUA 853AAA bga rework station  package:

 

Inner box size  37*38*18cm

Outer carton box size  73*40*39cm

Q'TY  4pcs/ctn

Goods net weight  5.54kg/pc

outer carton weight  23.41kg

 

 

These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for 110V  / 230V/ 240V units     

 

 

General Usage

1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC,

 Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge, all kinds of mobile phone motherboard SMT IC and LED lights.

2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.

Home | Company Profile | Products | Shopping Cart | Support | Contact Us Copyright ? 2011 Yihua Store All rights reserved.