YIHUA 959D-Digital Hot Air Rework Station, High Power with 3 Memories, Airflow Efficiency, °F /°C Display, Accurate Temp.(212°F~932°F), Brushed Aluminum Panel & Safety Features

• Digital Hot Air Rework Station for Electronics Repair: The YIHUA 959D is built for users upgrading from basic hot air tools to a more controlled bench rework station. It is suitable for SMD component removal, PCB rework, heat shrink tubing, electronics repair, selected conformal coating removal tasks, and other controlled hot air applications.
• 700W Hot Air Gun with PID Temperature Control: The 959D supports a 212–932°F temperature range and up to 120L/min airflow. The PID temperature control program helps monitor and compensate temperature during use, supporting steadier hot air output for SMD rework, component removal, and repeated bench repair tasks.
• Save 3 Common Temperature Settings: Store up to three preferred temperature settings using CH1, CH2, and CH3, then switch between them with one press. This is useful for users who repeat common tasks such as heat shrink tubing, SMD rework, and selected coating removal or repair applications.
• Standby Cooling for Safer Work Pauses: When the hot air gun is returned to the holder, the station cools down to 212°F / 100°C and enters standby. When picked up again, it heats back toward the set temperature. The 8-level airflow knob lets users adjust air output for different component sizes and working needs.
• Useful Rework Accessories Included: The kit includes the 959D hot air rework station, heat-resistant silicone work mat, 3 hot air nozzles, 2 pairs of ESD-safe tweezers, and IC popper / extractor. Designed for 110–127V US power 

YIHUA 959D Digital Hot Air Rework Station, 700W SMD Rework Hot Air Gun, 212–932°F, PID Temperature Control, 3 Preset Channels, In-Holder Standby Mode, for PCB Electronics Repair

YIHUA 959D Digital Hot Air Rework Station, 700W Hot Air Gun for SMD Rework, 212–932°F, 120L/min Airflow, PID Temp Control, 3 Preset Memory Channels, ESD Safe, 110–127V

YIHUA 959D Hot Air Rework Station for SMD Component Removal, PCB Repair, Heat Shrink Tubing, Electronics Repair, 700W Hot Air Gun, 3 Preset Channels, Standby Mode

Digital Hot Air Rework Station for Electronics Repair: The YIHUA 959D is built for users upgrading from basic hot air tools to a more controlled bench rework station. It is suitable for SMD component removal, PCB rework, heat shrink tubing, electronics repair, selected conformal coating removal tasks, and other controlled hot air applications.

700W Hot Air Gun with PID Temperature Control: The 959D supports a 212–932°F temperature range and up to 120L/min airflow. The PID temperature control program helps monitor and compensate temperature during use, supporting steadier hot air output for SMD rework, component removal, and repeated bench repair tasks.

Save 3 Common Temperature Settings: Store up to three preferred temperature settings using CH1, CH2, and CH3, then switch between them with one press. This is useful for users who repeat common tasks such as heat shrink tubing, SMD rework, and selected coating removal or repair applications.

Standby Cooling for Safer Work Pauses: When the hot air gun is returned to the holder, the station cools down to 212°F / 100°C and enters standby. When picked up again, it heats back toward the set temperature. The 8-level airflow knob lets users adjust air output for different component sizes and working needs.

Useful Rework Accessories Included: The kit includes the 959D hot air rework station, heat-resistant silicone work mat, 3 hot air nozzles, 2 pairs of ESD-safe tweezers, and IC popper / extractor. Designed for 110–127V US power

Dedicated Hot Air Rework Station: The YIHUA 959D is a digital hot air rework station for SMD component removal, PCB rework, heat shrink tubing, electronics repair, selected conformal coating removal tasks, and controlled hot air applications.

700W Hot Air with PID Control: Supports 212–932°F temperature control and up to 120L/min airflow. PID temperature stabilization helps maintain steadier hot air output during SMD rework, component removal, and repeated repair tasks.

3 Preset Temperature Channels: Save three frequently used temperature settings and switch between CH1, CH2, and CH3 with one press. Useful for repeated tasks such as heat shrink, SMD rework, and other regular bench applications.

In-Holder Standby Mode: Return the hot air gun to the holder and the station cools down to 212°F / 100°C standby. Pick it up again and it heats back toward the set temperature. The 8-level airflow knob helps adjust airflow for different work needs.

Accessories and Support Included: Includes heat-resistant silicone work mat, 3 hot air nozzles, 2 pairs of ESD-safe tweezers, and IC popper / extractor. Designed for 110–127V US power with 12-month US-exclusive manufacturer technical coverage.

The YIHUA 959D is a dedicated digital hot air rework station designed for users who want more control than a basic hot air tool. It is suitable for SMD component removal, PCB rework, heat shrink tubing, electronics repair, selected conformal coating removal tasks, and repeated hot air applications.

The 700W hot air gun supports a 212–932°F temperature range and up to 120L/min airflow. PID temperature control helps monitor and compensate temperature during operation, supporting steadier hot air output when working on SMD components, circuit boards, and repair tasks.

For users who work with repeated temperature settings, the 959D includes 3 preset channels. You can save common working temperatures into CH1, CH2, and CH3, then switch between them with one press. This is useful for repeated applications such as heat shrink tubing, SMD rework, and component removal tasks that use different temperature settings.

The in-holder standby mode helps manage work pauses. When the hot air gun is placed back into the holder, the station cools down to 212°F / 100°C and enters standby. When the gun is picked up again, it heats back toward the set temperature. This helps reduce unnecessary heating when the hot air gun is not actively being used.

The kit includes a heat-resistant silicone work mat for temporary screw and component placement, 3 hot air nozzles for different work areas, 2 pairs of ESD-safe tweezers, and an IC popper / extractor for assisting with component removal. The 959D is designed for 110–127V US power and is suitable for electronics repair benches, DIY electronics, RC/drone repair, school labs, and regular SMD rework tasks.